Version 4.0
2024-03-27
BOSCHE Weighing Systems
Page 27
Weighing Terminal EWI / MWI Operation | 4
4.9 Weighing
Display weighing
4.9.1 Simple weighing
After switching on, the self-test and initialization of the scale, "zero" is shown.
If the weight of the weighing sample will exceed the set weighing range the fol-
lowing message is displayed:
Please remove the load from the platform / weighing bridge immediately to
avoid damage.
:HLJKW
Net
*URVV
8QLW
DatH& 7LPH
StabOH aFtive 6FDOH Ta rH
UnstabOH
To Next Page
Loading...