Page 81
BOSCHE Weighing Systems
Version 4.0
2024-03-27
5 | Function menu (advanced functions) Weighing Terminal EWI / MWI
Function menu F05-04 - ATT (attenuation value)
The filter tries to predict the next weighing value based on several factors. The
speed and the delta of the measured values are also considered.
An attenuation value of ATT = 0 requires more steps to put out a filtered value.
An attenuation value of ATT = 10 requires less steps to put out a filtered value.
A high attenuation value offers intermediate values less stable but a higher
speed.
To Next Page
Loading...