Bowers M1 - Page 40

M1 – M3 Display Units
Page 40
Allows to remove the value of the
measurement on the measuring
screen, only the bargraph
appears.
Galva :
None : simple and double
Ajouter mode curseur
Displays small indicators
(triangles) on the measuring
screen to show the maximum and
minimum value measured
None : simple and double
Ajouter mode curseur
Allows to move the needle like
with the screw on an old analogue
display.
Galva :
None : simple and double
Allows to display 2 probe on the
measuring screen (except in
GALVA mode)
Galva :
None : simple and double
Ajouter mode curseur