M1 – M3 Display Units
Page 6
2. INTRODUCTION
2.1. PRODUCT PRESENTATION
The M1 and M3 display units allow making dimensional control using 1 or 2 air
gauges. Depending on the version it is possible to make simple measurement (with
one air gauge), or display 2 characteristics on the screen and can make static
measurement or dynamic (Max, Min, Max-Min…)
The M1-M3 can be connected to a PC thanks to its RS232 or USB connection.
A footswitch can be connected in order to transfer measurements.
The M1 / M3 displays for air gauges requires a minimum of 2 masters for calibration.
2.2. VERSIONS
Display unit M1 for 1 air gauge
Display unit M3 for 2 air gauges or 1 air
gauge with 2 measuring levels
To Next Page
Loading...