Branson 8050 - User Manual

Questions and Answers

P
phillip95Sep 3, 2025
What to do if the engine oil warning lamp is on during operation of my Branson 8050?
- J
  joshuabakerSep 3, 2025
  If the engine oil warning lamp is on while operating your Branson Tractor, check the following: * Ensure the engine oil level is adequate; refill if low. * If the engine oil viscosity is low, replace the engine oil with the one with proper viscosity. * If the pressure switch is defective, replace the switch. * If the oil pump is defective, contact dealer for repair.
S
smithaaronSep 1, 2025
What to do if the motor starts but the engine does not start in my Branson 8050?
- C
  Claudia JordanSep 2, 2025
  If the motor starts but the engine doesn't start in your Branson Tractor, check these: * Make sure the fuel tank isn't empty; fill it up and drain any air from the system. * If the fuel is mixed with air, drain the air from the fuel. * If the engine only runs when the reducer lever is pulled, charge the battery.
C
conleyjenniferAug 31, 2025
Why is the engine power too weak on my Branson 8050?
- C
  Courtney StrongAug 31, 2025
  If your Branson Tractor's engine power seems weak, the following could be the cause: * The air cleaner might be clogged; inspect it. * The nozzle might be stained with carbon; contact the dealer for repair.
B
Brittany WigginsAug 29, 2025
What to do if the engine is over heated in my Branson Tractor?
- L
  lambertvincentAug 29, 2025
  If your Branson Tractor's engine is overheating, consider the following: * Check and refill the coolant if the level is low. * Inspect the fan belt for slack or damage; adjust or replace it as necessary. * Clean the radiator core if it's clogged. * Ensure the engine oil level is adequate; refill if low. * Reduce the load if the engine is running under too much strain.
S
Susan JonesAug 27, 2025
What to do if the horn does not sound on my Branson Tractor?
- L
  lopezdavidAug 27, 2025
  If the horn on your Branson Tractor isn't working, check the following: * If the fuse is burnt out, replace the fuse. * If the horn switch contact is in bad condition, inspect the horn switch.
C
Chelsea SmithAug 26, 2025
What to do if the direction indicator lamp will not operate in my Branson 8050?
- S
  Steven WilliamsAug 27, 2025
  If the direction indicator lamp on your Branson Tractor isn't working, consider these possibilities: * A burnt-out bulb: Replace the bulb. * A blown fuse: Replace the fuse. * A defective flasher unit: Replace the flasher unit. * Poor contact: Inspect and clean the grounding and terminals.
P
Penny MackAug 25, 2025
What to do if the headlamp will not turn on in my Branson 8050 Tractor?
- M
  Mrs. Alexis ThompsonAug 25, 2025
  If the headlamp on your Branson Tractor won't turn on, check the following: * If the bulb is burnt out, replace it. * If the fuse is burnt out, replace the fuse. * If the cable is separated from the socket, inspect the cable.
W
william40Aug 22, 2025
What to do if the lamps will not turn on in my Branson 8050?
- P
  Peter RussellAug 23, 2025
  If the lamps on your Branson Tractor won't turn on, consider these potential causes: * A burnt-out bulb: Replace the bulb. * A blown fuse: Replace the fuse. * Bad cable contact: Inspect the cable and secure the connection. * Defective switch: Replace the switch. * Poor grounding: Securely connect the grounding cable to the body. * Discharged battery: Charge the battery.

Summary

General Precautions

About Warranty

Warranty Service Information

Details required information for warranty service.

Overview of the Tractor

Tractor Front View Components

Identifies front external parts of the tractor.

Tractor Rear View Components

Identifies rear external parts and hitch components.

Tractor Engine Compartment Components

Identifies key engine and fluid system components.

Functions

Switches and Levers Identification

Identifies key switches and levers on the tractor.

Steering Column Adjustments

Details adjustment mechanisms for the steering column.

Lighting and Safety Switches

Explains the use of emergency and lighting control switches.

Drive System Controls

Describes operation of 4WD selection and shuttle lever.

Dash Meter and Indicators

Explains the dashboard gauges and warning indicators.

Pedals Operation

Identifies clutch, brake, and accelerator pedals.

Control Levers (Right & Left Hand)

Identifies and explains the functions of right and left-hand levers.

Hitch and PTO Controls

Explains operation of rear implement, hitch, and PTO controls.

Other Controls and Features

Lists and introduces various other tractor features like climate control.

Operation & Work

Pre-Operation Checks and Break-in

Outlines checks before operation and new tractor break-in guidelines.

Engine Start and Stop Procedures

Details the procedures for safely starting and stopping the engine.

Safe Driving Practices

Covers safe operation on roads, slopes, and pavement.

Loading, Unloading, and Implement Handling

Outlines safe procedures for loading, unloading, and connecting implements.

Wheel Tread and Power Steering

Explains wheel tread adjustment and power steering system.

Maintenance After Work

Post-Work Cleaning and Greasing

Instructions for cleaning and lubricating after use.

Maintenance for Prolonged Storage

Guidelines for preparing the tractor for long-term storage.

Storage Procedures and Battery Care

Details steps for storing the tractor and battery.

Periodic Maintenance and Adjustment

Maintenance Schedule and Fluid Capacities

Provides a schedule for maintenance and lists fluid capacities.

Engine Oil and Filter Maintenance

Details checking and changing engine oil and filter.

Transmission;Hydraulic Oil and Filter Maintenance

Guides on checking and changing transmission/hydraulic oil and filter.

Front Axle Oil and Coolant Maintenance

Explains front axle oil check and coolant/anti-freeze handling.

Air Cleaner, Battery, and Brake Adjustments

Covers air cleaner, battery maintenance, and brake adjustments.

Hose, Cable, Belt, and Steering Checks

Instructions for checking hoses, cables, belts, and steering wheel.

Wheel Alignment, Fuses, and Exhaust Gas

Details wheel alignment, fuse replacement, and exhaust gas interpretation.

Troubleshooting

Engine Troubleshooting

Provides solutions for common engine starting and running issues.

Engine Performance and Warning Lamp Issues

Addresses engine revolution, overheating, and warning lamp problems.

Clutch and Brake Troubleshooting

Solutions for clutch slippage and brake system faults.

Hydraulic System Troubleshooting

Solutions for implement lifting and lowering problems.

Electrical System Troubleshooting

Addresses issues with lights, horn, and other electrical components.

Specifications

Tractor Dimensions and Weight

Lists overall dimensions, wheel base, tread, and weight.

Engine Specifications

Details engine model, type, output, and displacement.

Transmission, PTO, and Hydraulic Specifications

Covers transmission type, PTO speed, and hydraulic system details.

Summary

General Precautions

About Warranty

Warranty Service Information

Details required information for warranty service.

Overview of the Tractor

Tractor Front View Components

Identifies front external parts of the tractor.

Tractor Rear View Components

Identifies rear external parts and hitch components.

Tractor Engine Compartment Components

Identifies key engine and fluid system components.

Functions

Switches and Levers Identification

Identifies key switches and levers on the tractor.

Steering Column Adjustments

Details adjustment mechanisms for the steering column.

Lighting and Safety Switches

Explains the use of emergency and lighting control switches.

Drive System Controls

Describes operation of 4WD selection and shuttle lever.

Dash Meter and Indicators

Explains the dashboard gauges and warning indicators.

Pedals Operation

Identifies clutch, brake, and accelerator pedals.

Control Levers (Right & Left Hand)

Identifies and explains the functions of right and left-hand levers.

Hitch and PTO Controls

Explains operation of rear implement, hitch, and PTO controls.

Other Controls and Features

Lists and introduces various other tractor features like climate control.

Operation & Work

Pre-Operation Checks and Break-in

Outlines checks before operation and new tractor break-in guidelines.

Engine Start and Stop Procedures

Details the procedures for safely starting and stopping the engine.

Safe Driving Practices

Covers safe operation on roads, slopes, and pavement.

Loading, Unloading, and Implement Handling

Outlines safe procedures for loading, unloading, and connecting implements.

Wheel Tread and Power Steering

Explains wheel tread adjustment and power steering system.

Maintenance After Work

Post-Work Cleaning and Greasing

Instructions for cleaning and lubricating after use.

Maintenance for Prolonged Storage

Guidelines for preparing the tractor for long-term storage.

Storage Procedures and Battery Care

Details steps for storing the tractor and battery.

Periodic Maintenance and Adjustment

Maintenance Schedule and Fluid Capacities

Provides a schedule for maintenance and lists fluid capacities.

Engine Oil and Filter Maintenance

Details checking and changing engine oil and filter.

Transmission;Hydraulic Oil and Filter Maintenance

Guides on checking and changing transmission/hydraulic oil and filter.

Front Axle Oil and Coolant Maintenance

Explains front axle oil check and coolant/anti-freeze handling.

Air Cleaner, Battery, and Brake Adjustments

Covers air cleaner, battery maintenance, and brake adjustments.

Hose, Cable, Belt, and Steering Checks

Instructions for checking hoses, cables, belts, and steering wheel.

Wheel Alignment, Fuses, and Exhaust Gas

Details wheel alignment, fuse replacement, and exhaust gas interpretation.

Troubleshooting

Engine Troubleshooting

Provides solutions for common engine starting and running issues.

Engine Performance and Warning Lamp Issues

Addresses engine revolution, overheating, and warning lamp problems.

Clutch and Brake Troubleshooting

Solutions for clutch slippage and brake system faults.

Hydraulic System Troubleshooting

Solutions for implement lifting and lowering problems.

Electrical System Troubleshooting

Addresses issues with lights, horn, and other electrical components.

Specifications

Tractor Dimensions and Weight

Lists overall dimensions, wheel base, tread, and weight.

Engine Specifications

Details engine model, type, output, and displacement.

Transmission, PTO, and Hydraulic Specifications

Covers transmission type, PTO speed, and hydraulic system details.

Branson 8050 Specifications

General

Brand	Branson
Model	8050
Category	Tractor
Language	English

Related product manuals

Branson 8050 - User Manual

Table of Contents

Questions and Answers

Summary

General Precautions

About Warranty

Warranty Service Information

Overview of the Tractor

Tractor Front View Components

Tractor Rear View Components

Tractor Engine Compartment Components

Functions

Switches and Levers Identification

Steering Column Adjustments

Lighting and Safety Switches

Drive System Controls

Dash Meter and Indicators

Pedals Operation

Control Levers (Right & Left Hand)

Hitch and PTO Controls

Other Controls and Features

Operation & Work

Pre-Operation Checks and Break-in

Engine Start and Stop Procedures

Safe Driving Practices

Loading, Unloading, and Implement Handling

Wheel Tread and Power Steering

Maintenance After Work

Post-Work Cleaning and Greasing

Maintenance for Prolonged Storage

Storage Procedures and Battery Care

Periodic Maintenance and Adjustment

Maintenance Schedule and Fluid Capacities

Engine Oil and Filter Maintenance

Transmission;Hydraulic Oil and Filter Maintenance

Front Axle Oil and Coolant Maintenance

Air Cleaner, Battery, and Brake Adjustments

Hose, Cable, Belt, and Steering Checks

Wheel Alignment, Fuses, and Exhaust Gas

Troubleshooting

Engine Troubleshooting

Engine Performance and Warning Lamp Issues

Clutch and Brake Troubleshooting

Hydraulic System Troubleshooting

Electrical System Troubleshooting

Specifications

Tractor Dimensions and Weight

Engine Specifications

Transmission, PTO, and Hydraulic Specifications

Summary

General Precautions

About Warranty

Warranty Service Information

Overview of the Tractor

Tractor Front View Components

Tractor Rear View Components

Tractor Engine Compartment Components

Functions

Switches and Levers Identification

Steering Column Adjustments

Lighting and Safety Switches

Drive System Controls

Dash Meter and Indicators

Pedals Operation

Control Levers (Right & Left Hand)

Hitch and PTO Controls

Other Controls and Features

Operation & Work

Pre-Operation Checks and Break-in

Engine Start and Stop Procedures

Safe Driving Practices

Loading, Unloading, and Implement Handling

Wheel Tread and Power Steering

Maintenance After Work

Post-Work Cleaning and Greasing

Maintenance for Prolonged Storage

Storage Procedures and Battery Care

Periodic Maintenance and Adjustment

Maintenance Schedule and Fluid Capacities

Engine Oil and Filter Maintenance