Introduction 10
DOC-001000 Ver 6 Clearway 2 User Manual .
Cautions!
• Always place the Clearway 2 on a hard, clean surface, not on the
floor
• Always place foot
pedal on dry surface. Ensure cable does not
cause a trip hazard
• Always position the Clearway 2 so that the air inlets are not
obscured or blocked
• Never use the device unless a bacteria filter is
patient circuit
• Keep the power cord in good o
rder and away from heated
surfaces
• Device is not suitable for sterilisation. F
cleaning the Clearway 2 see page 57
• In the event of a power failure or malfunction remove the mask
or patient interface, and ensure airways are clear
This product does not contain latex in any of its components or
accessories
To Next Page
Loading...
