Breas Clearway 2 - Clearway 2 in Other Countries

77 Technical Specifications
Clearway 2 User Manual
DOC-001000 Ver 6
Recommended separation distances between external power
conductors and the Clearway 2
Rated Maximum Current in
Conductor (A)
Separation Distance (M)
50-60 Hz
d= I/2πH= I/188
1
0.005
10
0.05
30
0.16
For conductors rated at a maximum current not listed above, the
recommended separation distance d in metres (m) can be estimated using the
equation d=I/2πH, where I is the maximum current rating of the conductor
in amperes (A) according to the transmitter manufacturer; H is the Clearway
2 immunity compliance level to electromagnetic fields in the 50-60 Hz
frequency span (30 A/m).
Portable RF devices (e.g. mobile phones) should be used no
closer than 30 cm (12 inches) to any part of the ME Equipment,
including any cables
Clearway 2 in other countries
If you are traveling to a country with a line voltage which is different to where
you were issued the device, then a different power cord or an international plug
adaptor may be required to ensure your power cord is compatible with the
power outlet of the country where you are travelling.