Breas Clearway 2 User Manual

Technical Specifications 76
DOC-001000 Ver 6 Clearway 2 User Manual .
Recommended separation distances between portable and
mobile RF communications equipment and the Clearway 2
The Clearway 2 is intended for use in an electromagnetic environment in which
radiated RF disturbances are controlled. The customer or the user of the
Clearway 2 can help prevent electromagnetic interference by maintaining a
minimum distance between portable and mobile RF communications
equipment (transmitters) and the Clearway 2 as recommended below,
according to the maximum output power of the communications equipment.
Rated Maximum Output
Power of Transmitter
(W)
Separation Distance According to the
Frequency of Transmitter (M)
150 kHz to
80 MHz
d= 1.2*√P
(meters)
80 MHz to
800 MHz
d=1.2*√P
(meters)
800 MHz to
2.5 GHz
d=1.2*√P
(meters)
0.01
0.12
0.12
0.23
0.1
0.38
0.38
0.73
1
1.2
1.2
2.3
10
3.8
3.8
7.3
100
12
12
23
For transmitters rated at a maximum output power not listed above, the
recommended separation distance d in metres (m) can be estimated using the
equation applicable to the frequency of the transmitter, where P is the
maximum output power rating of the transmitter in watts (W) according to
the transmitter manufacturer.
Notes
• At 80 MHz and 800 MHz, the separation distance for the higher
frequency range applies.
• These guidelines may not apply in all situations. Electromagnetic
propagation is affected by absorption and reflection from structures,
objects, and people.

Breas Clearway 2 Specifications

General

Brand	Breas
Model	Clearway 2
Category	Medical Equipment
Language	English