Breas Clearway 2 User Manual

75 Technical Specifications
Clearway 2 User Manual
DOC-001000 Ver 6
transmitters, and electromagnetic site survey should be considered. If the
measured field strength in the location in which the ME equipment is used
exceeds the applicable RF compliance level above, the ME equipment should
be observed to verify normal operation. If abnormal performance is observed,
additional measures may be necessary, such as re-orientating or relocating the
equipment.
b) Over the frequency range 150 KHz to 80 MHz, the field strengths should
be less than 10 V/m.
Electromagnetic Emission
The Clearway is intended for use in the electromagnetic environment specified
below. The user of the device should ensure it is used in such an environment.
Emissions Test
Compliance
Electromagnetic Environment -
Guidance
RF emissions
CISPR 11
Group 1
The Clearway 2 uses RF energy only for
its internal function. Therefore, its RF
emissions are very low and are not likely
to cause any interference in nearby
electronic equipment.
RF emissions
CISPR 11
Class B
Harmonic
emissions IEC
61000-3-2
Class A
Voltage
fluctuations/flicker
emission
IEC 61000-3-3
Complies
The Clearway 2 is suitable for use in
all establishments, including domestic
establishments and those directly
connected to the public low-voltage
power supply network that supplies
buildings used for domestic purposes.

Breas Clearway 2 Specifications

General

Brand	Breas
Model	Clearway 2
Category	Medical Equipment
Language	English