35
Option 3 – Wi-Fi ManualSet-up
Before you start
Make sure you know your:
k Wi-Fi network name (SSID)
k Wi-Fi network password
k Wi-Fi encryption type,
(e.g. WEP, WPA, WPA2) if
your network is hidden.
Also ensure you have access to a Wi-Fi
enabled computer or smart device
(e.g. iPad, smart phone, etc.)
Part 1 – On your BeerDroid
a. Use the
and
arrows on
the control panel to scroll to
Wi-Fi in the main menu.
b.
will appear
on the user prompt panel.
c. Press
on the control panel to
enter the Wi-Fi configuration menu.
d. Use the
and
arrows scroll
through to manual setup.
e. Press
on the control
panel to start setup.
f. Wait for the
icon to start
flashing (this could take 10 or more
seconds), then proceed to Part 2.
Part 2 – On your Wi-Fi
enabled computer
or smart device
g. Go to your Wi-Fi
configuration setting and
view available networks.
h. Connect to the "BeerDroid.
xx.xx.xxxx.xxxx" (where the xx
are your units serial numbers)
network. Ignore any limited
connectivity or security warnings.
i. Open a browser window,
e.g. Internet Explorer, Safari,
Firefox, Chrome etc. Ignore any
message about not being able
to load your default page.
j. In the browser address bar
type http://192.168.1.1
k. The browser will request a
username and password,
enter brewart for each one.
l. You should now see the
"Overview" page.
m. Click either the "Configure Network"
link or menu item in the sidebar.
n. You should now see the
"Configure Network" page.
o. Click the "Display Wireless
Networks" button.
To Next Page
Loading...