BREWART BEERDROID - Bottling Operation; Bottle Filling and Headspace Management

BEERDROID INSTRUCTIONS
27
Equipment required
forbottling
k 12 x BrewArt PET bottles and caps:
740ml bottle designed
specifically for BrewArt
k Bottling valve:
For easy, controlled filling of bottles
Clean & Sanitise
the following
bottlingequipment
k Clean and sanitise bottles, caps,
bottling valve and connector. The
bottling valve should be disassembled
for cleaning and sanitising.
Bottling Process
k Fit the bottling valve, by attaching
the connector to the opposite end
of the bottling valve and fitting it to
the BeerDroid tap – see Diagram O.
k Add two BrewArt carbonation
drops to each 740ml bottle.
 Note
Place a bucket on the floor to catch
any drips or spills while bottling.
Bottling
O