Need help?Do you have a question about the BREWART BEERDROID and is the answer not in the manual?
General| Capacity | 10 liters |
|---|---|
| Connectivity | Wi-Fi |
| Automated Process | Yes |
| Brewing Capacity | 10 liters |
| Heating Method | Electric |
| Control Interface | Touchscreen |
| Material | Plastic and stainless steel |
| Power Supply | AC 220-240V, 50/60Hz |
| Compatibility | iOS and Android |
Instructions for rinsing and preparing the BeerDroid and its components.
Step-by-step guide for sanitizing the BeerDroid with tablets and water.
Details necessary conditions and placement for optimal BeerDroid operation.
Instructions for connecting power and turning on the BeerDroid unit.
Important checks and notes before starting a brewing program, including Wi-Fi status.
Step-by-step guide for adding ingredients and important handling precautions.
Introduces the functionality of controlling the BeerDroid using the BrewArt mobile app.
Lists the specific kegging components that require cleaning and sanitisation.
Provides instructions and notes for assembling the kegging valves.
Steps for attaching the keg caddy and preparing the keg liner and connector.
Details on connecting filling tubes, caps, and securing the keg.
Instructions for adding primer, hops, and completing the keg setup.
Guides users on inverting the keg, filling, and monitoring the fill level.
Instructions for finalising keg connections and post-filling steps.
Details the process of filling bottles and managing correct headspace.
Covers screwing caps, disconnecting the valve, and storing bottles for conditioning.
Guides users to online resources for troubleshooting common issues.
Covers naming the BeerDroid and completing the link to the BrewArt account.
Addresses common errors related to joining the Wi-Fi network, such as authentication failures.
Explains errors related to the BeerDroid not receiving an IP address from the Wi-Fi modem.
Details errors occurring when the WPS setup times out or is not enabled.
To Next Page