40
Operating Error Codes
During operation you may receive the following error codes
Error Code E1
Description Cause User Action
A heating or
cooling error has
been detected
Cause 1: The unit has failed
to heat or cool your brew to
the target temperature within
an acceptable time limit.
Cause 2: The level of your
brew is too low. Note the unit
must be filled to the 10L level
for correct operation.
1. Check liquid level
2. Accept error and
continue the program,
if error re-occurs please
visit brewart.com/101
where you will find FAQs
and trouble shooting
information. If this does
not help resolve your
issue, please contact
customer service.
To Next Page
Loading...