BREWART BEERDROID - Troubleshooting Information; Accessing Troubleshooting Resources

BEERDROID INSTRUCTIONS
29
Cleaning
 WARNING
ONLY USE A SOFT CLOTH WHEN
CLEANING YOUR BEERDROID.
Do not use any abrasive materials
or detergent as these may damage
your BeerDroid and aect the
quality of your next brew.
k Ensure the power is turned o
and the power cord is removed
from the power point.
k Aer kegging, and once your
BeerDroid is empty, move the
unit to a sink or draining area
using the liing handles.
k Remove the lid and rinse it
under a tap, using a so cloth
to remove any residue.
k Remove the Tap and Drain
Plug and flush the residue
inside the chamber with
warm water into the sink.
k Using a so cloth and warm water,
remove all remaining residue
from within the chamber.
k Clean the drain plug and tap
(dissassemble the two piece
tap for cleaning) thoroughly
with warm water.
k Rinse your BeerDroid
with clean water.
k Sponge out any remaining water.
k Once the entire unit is dry, re-fit
the plug, tap and lid to prevent
anything from falling into your
BeerDroid when not in use.
Troubleshooting
For the most current
troubleshooting information
go to brewart.com/101 where
you will also find FAQs and
instructional videos.