BREWART BEERDROID - Wi-Fi Operation

BEERDROID INSTRUCTIONS
37
Wi-Fi Operation
Before starting a brewing program,
Wi-Fi may be switched on and o via the
display screen main menu without the
need to reconfigure the Wi-Fi settings.
However, the Wi-Fi can not be turned on
or o while a brewing program is running.
Your BeerDroid will try to connect
to the BrewArt Server via your Wi-Fi
network once Wi-Fi is configured and
on. If your BeerDroid encounters any
connection issues it will continue to try
and connect until successful, without
interrupting or disrupting any brew
program that is running.
You can determine the status of your
BeerDroid’s internet connection by
the checking the

and
w
icons
on the display screen.
If your BeerDroid’s Wi-Fi

icon is blinking:
k Check that your Wi-Fi network
is operating correctly.
k Make sure your BeerDroid
is within the coverage area
of your Wi-Fi network.
k You may have changed your Wi-Fi
set-up since configuring your
BeerDroid – e.g. network name,
security settings, DHCP settings etc.
If your BeerDroid’s internet
w
icon is
blinking, check that your Wi-Fi modem
has internet access.
ICON STATUS EXPLANATION
Both Blank Your BeerDroid’s Wi-Fi is o.

Icon On: BeerDroid is connected to your Wi-Fi network
Icon Blinking: BeerDroid is attempting
to connect to your Wi-Fi network.
w
Icon On: BeerDroid is connected to the
BrewArt server via your Wi-Fi network.
Icon Blinking: BeerDroid is attempting
to connect to the BrewArt Server.