Briggs & Stratton 520000 User Manual

16
2
2
Assemble Rocker Arm Shaft
1. Oil all components before assembling.
2. Small grooves in rocker shaft (A) next to oil
holes (B) must face down.
3. Assemble rocker arm (G) components, noting
order of assembly shown in Figure 24.
Figure 24
4. Note position of three thrust washers (F),
springs (D), snap rings (H)
5. Install set screw (C) in center rocker arm
shaft support (E).

Briggs & Stratton 520000 Specifications

General

Brand	Briggs & Stratton
Model	520000
Category	Engine
Language	English