Broadcom NetXtreme BCM57 Series User Manual

Broadcom Gigabit Ethernet Teaming ServicesNetXtreme User Guide
Broadcom
®
April 2017 • 2CS57XX-CDUM514-R Page 118
Teaming and Other Advanced Networking Properties
• Checksum Offload
• IEEE 802.1p QoS Tagging
• Large Send Offload
• Jumbo Frames
• IEEE 802.1Q VLANs
• Wake on LAN
• Preboot Execution Environment (PXE)
Before creating a team, adding or removing team members, or changing advanced settings of a team member,
make sure each team member has been configured similarly. Settings to check include VLANs and QoS Packet
Tagging, Jumbo Frames, and the various offloads. The advanced adapter properties and teaming support are
listed in Table 14.
a
All adapters on the team must support this feature. Some adapters may not support this feature if IPMI is also
enabled.
b
Must be supported by all adapters in the team.
c
As a PXE sever only, not as a client.
Table 14: Advanced Adapter Properties and Teaming Support
Adapter Property Supported by Teamed Virtual Adapter
Checksum Offload Yes
IEEE 802.1p QoS Tagging No
Large Send Offload
Yes
a
Jumbo Frames
Yes
b
IEEE 802.1Q VLANs Yes
Wake on LAN No
Preboot Execution environment (PXE)
Yes
c

Broadcom NetXtreme BCM57 Series Specifications

General

Brand	Broadcom
Model	NetXtreme BCM57 Series
Category	Controller
Language	English