Broadcom NetXtreme BCM57 Series User Manual

TroubleshootingNetXtreme User Guide
Broadcom
®
April 2017 • 2CS57XX-CDUM514-R Page 164
Checking if Current Drivers Are Loaded
Windows
See Viewing Adapter Information to view useful information about the adapter, its link status, and network
connectivity.
Linux
To verify that the TG3 Linux driver is loaded properly, run:
lsmod | grep tg3
If the driver is loaded, a line similar to the one below is displayed, where size is the size of the driver in bytes,
and n is the number of adapters configured.
Running a Cable Length Test
In Windows environments, a cable length test can be run. See Analyzing Cables for information about running
a cable length test.
Table 23: Linux Driver
Module Size Used by
TG3 size n

Broadcom NetXtreme BCM57 Series Specifications

General

Brand	Broadcom
Model	NetXtreme BCM57 Series
Category	Controller
Language	English