Broadcom NetXtreme BCM57 Series User Manual

Using Broadcom Advanced Control Suite 4NetXtreme User Guide
Broadcom
®
April 2017 • 2CS57XX-CDUM514-R Page 62
Device No.
The number assigned to the adapter by the operating system.
Function No. The port number of the adapter. For a single-port adapter, the function number is 0. For a two-port
adapter, the function number for the first port is 0, and the function number for the second port is 1.
Interrupt Request. The interrupt line number that is associated with the adapter. Valid numbers range from 2 to
25.
Memory Address. The memory mapped address that is assigned to the adapter. This value can never be 0.
Viewing Hardware Information
The Hardware section of the Information tab displays information about the hardware settings for the selected
network adapter.
To view Hardware for any installed network adapter, click the name of the adapter listed in the Explorer View
pane, then click the Information tab.
Note: Some information may not be available for all Broadcom network adapters.

Broadcom NetXtreme BCM57 Series Specifications

General

Brand	Broadcom
Model	NetXtreme BCM57 Series
Category	Controller
Language	English