Using Broadcom Advanced Control Suite 4NetXtreme User Guide
Broadcom
®
April 2017 • 2CS57XX-CDUM514-R Page 83
Using Expert Mode
Use Expert Mode to create a team, modify a team, add a VLAN, and configure LiveLink for a Smart Load
Balance and Failover and SLB (Auto-Fallback Disable) team. To create a team using the wizard, see Using the
Broadcom Teaming Wizard.
To set the default Teaming Mode, select Options from the Tools menu, then select Expert Mode or Wizard
Mode (the default is Wizard Mode).
Creating a Team
1. From the Teams menu, select Create Team, or right-click one of the devices in the “Unassigned Adapters”
section and select Create a Team. This option is not available if there are no devices listed in the
“Unassigned Adapters” sections, which means all adapters are already assigned to teams.
2. Click Expert Mode.
Note: Enabling Dynamic Host Configuration Protocol (DHCP) is not recommended for members of an
SLB type of team.
Note: If you want to always use Expert Mode to create a team, click Default to Expert Mode on next
start.
To Next Page
Loading...
Need help?
General
