Broadcom NetXtreme BCM57 Series User Manual

Using Broadcom Advanced Control Suite 4NetXtreme User Guide
Broadcom
®
April 2017 • 2CS57XX-CDUM514-R Page 84
3. Click the Create Team tab.
4. Click the Team Name field to enter a team name.
5. Click the Team Type field to select a team type.
6. Assign any available adapter or adapters to the team by selecting the adapter from the Load Balance
Members list. There must be at least one adapter selected in the Load Balance Members list.
7. You can assign any other available adapter to be a standby member by selecting it from the Standby
Member list.
The Large Send Offload (LSO), Checksum Offload (CO), and RSS indicate if the LSO, CO, and/or RSS
properties are supported for the team. The LSO, CO, and RSS properties are enabled for a team only when
all of the members support and are configured for the feature.
Note: The Create Team tab appears only if there are teamable adapters available.
Note: There must be at least one Broadcom network adapter assigned to the team.

Broadcom NetXtreme BCM57 Series Specifications

General

Brand	Broadcom
Model	NetXtreme BCM57 Series
Category	Controller
Language	English