EasyManuals Logo

Broadcom NetXtreme BCM57 Series User Manual

Broadcom NetXtreme BCM57 Series
174 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #138 background imageLoading...
Page #138 background image
Broadcom Gigabit Ethernet Teaming ServicesNetXtreme User Guide
Broadcom
®
April 2017 2CS57XX-CDUM514-R Page 138
9 Network adapter is
disconnected.
The physical adapter is not
connected to the network
(it has not established link).
Check that the network cable is
connected, verify that the
network cable is the right type,
and verify that the link partner
(switch or hub) is working
correctly.
10 Network adapter is connected. The physical adapter is
connected to the network
(it has established link).
Informational message only. No
action is required.
11 Broadcom Advanced Program
Features Driver is not
designed to run on this version
of Operating System.
The driver does not
support the operating
system on which it is
installed.
Consult the driver release
notes and install the driver on a
supported operating system or
update the driver.
12 Hot-standby adapter is
selected as the primary
adapter for a team without a
load balancing adapter.
A standby adapter has
been activated.
Replace the failed physical
adapter.
13 Network adapter does not
support Advanced Failover.
The physical adapter does
not support the Broadcom
NIC Extension (NICE).
Replace the adapter with one
that does support NICE.
14 Network adapter is enabled
via management interface.
The driver has successfully
enabled a physical adapter
through the management
interface.
Informational message only. No
action is required.
15 Network adapter is disabled
via management interface.
The driver has successfully
disabled a physical
adapter through the
management interface.
Informational message only. No
action is required.
16 Network adapter is activated
and is participating in network
traffic.
A physical adapter has
been added to or activated
in a team.
Informational message only. No
action is required.
17 Network adapter is de-
activated and is no longer
participating in network traffic.
The driver does not
recognize the installed
adapter.
Informational message only. No
action is required.
Table 16: Intermediate Driver Event Log Messages (Cont.)
System Event
Message Number
Message Cause Corrective Action

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Broadcom NetXtreme BCM57 Series and is the answer not in the manual?

Broadcom NetXtreme BCM57 Series Specifications

General IconGeneral
BrandBroadcom
ModelNetXtreme BCM57 Series
CategoryController
LanguageEnglish

Related product manuals