Using Broadcom Advanced Control Suite 4NetXtreme User Guide
Broadcom
®
April 2017 • 2CS57XX-CDUM514-R Page 74
6. If you want to designate one of the adapters as a standby member (optional), select Use the following
member as a standby member, then choose the standby member from the list of adapters.
7. The Auto-Fallback Disable mode feature allows the team to continue using the standby member rather than
switching back to the primary member if the primary member comes back online. To enable this feature,
select Enable Auto-Fallback Disable mode. Click Next.
To Next Page
Loading...
