Brooks LF80C - Page 10

Brooks Automation
x 278580 Revision A
LF80C ZeniD RFID Reader
Product Manual
5.6 Antenna Cable 22
5.6.1 Cable for Rod Antenna and Frame Antenna 22
5.6.2 Cable for Mini Antenna and Micro Antenna 22
5.7 Contents of Delivery 23
6 Installation . . . . . . . . . . . . . . . . . . . . 25
6.1 Safety Instructions 25
6.2 Qualified Installation Personnel 27
6.3 Unpacking 27
6.4 Assembly of the Device 28
6.4.1 Standard Housing for Enclosed Assembly
Material (Recommended) 29
6.4.2 Housing Without Mounts 30
6.5 Antenna Installation 32
6.5.1 Positioning the Antenna 32
6.5.2 Available Antenna Types 33
6.5.3 Dimensions for Planning 34
6.6 Power Supply 36
6.7 Terminal Connection 36
6.8 Ethernet Connection 38
6.9 External Input and Output 39
6.10 Commissioning 40
6.10.1 Required Operating Conditions 40
6.10.2 Tuning 40
7 Operation . . . . . . . . . . . . . . . . . . . . . . 41
7.1 Operating Personnel 41
7.2 Operation of the ASC-I1 Protocol 41
7.2.1 Structure of the Communication Protocol 41
7.2.2 Package Contents 41
7.2.3 Commands of Protocol 44
7.2.4 Parameter 60
7.2.5 Message Examples 62
7.3 Operation of SECS Protocol 63
7.3.1 Introduction 63
7.3.2 SECS-I Implementation 64
7.3.3 HSMS Option 68
7.3.4 HSMS Implementation 68
7.3.5 SECS-II Implementation 74
7.3.6 Parameters 92
7.3.7 SEMI E99 104