Brooks LF80C - 8 Service and Troubleshooting; General

Brooks Automation
278580 Revision A 141
LF80C ZeniD RFID Reader 8 Service and Troubleshooting
Product Manual 8.1 General
8 Service and Troubleshooting
This chapter gives you an overview of the following topics:
 Î
General
 Î
Qualified Troubleshooting Personnel
 Î
Safety Instructions
 Î
Error Codes
 Î
Error Display with LED
 Î
Reader Does Not Respond
 Î
Reset
 Î
Power Cut
 Î
Protocol Switching
 Î
Software Releases
 Î
Customer Service
8.1 General
Follow the instructions specified in the safety chapter
Follow the general safety information in the chapter
Î
Safety
Instructions.
 The RFID reader and its components must be serviced by the
manufacturer only!
 If errors occur, follow the instructions in this section. Do not
carry out any error eliminating measures other than the ones
described in this section!
 If you are uncertain about errors and their handling, contact
the manufacturer, see
Î
Visit us online: www.brooks.com.
Have the serial number of the RFID reader ready as shown on
the label (see
Î
Device Label) when contacting the
manufacturer!