Brooks LF80C - 9 Dismantling and Storage; Dismantling; Storage

Brooks Automation
278580 Revision A 151
LF80C ZeniD RFID Reader 9 Dismantling and Storage
Product Manual 9.1 Dismantling
9 Dismantling and Storage
This chapter gives you an overview of the following topics:
 Î
Dismantling
 Î
Storage
9.1 Dismantling
9.2 Storage
Store the reader and its components in a clean and dry environment with
the power supply disconnected.
Make sure the contacts remain clean. Observe the necessary storage
conditions.
 Remove the power supply device!
 Remove all cables!
 Loosen and remove the mounting screws!
 Remove the device from the installation area!