Brooks Automation
6 278580 Revision A
3 General Instructions LF80C ZeniD RFID Reader
3.2 Objectives of the Operating Instructions Product Manual
3.2.1 Target Group
This product manual is addressed to personnel with the following areas of
responsibility:
Definition according to DIN EN 60204-1:
Instructed Personnel
Persons who have been instructed and, if required, trained by a specialist
as to the tasks assigned to them, the possible risks of incorrect behavior
and the required safety equipment and safety measures.
Specialized Personnel
Persons who can evaluate the work assigned to them and recognize
possible risks based on their specialized training, knowledge, experience
and familiarity with the relevant standards.
Area of responsibility Competence
Installation Specialized personnel
Commissioning, operation and
decommissioning
Instructed personnel
Troubleshooting Specialized personnel
To Next Page
Loading...
