Brooks Automation
106 278580 Revision A
7 Operation LF80C ZeniD RFID Reader
7.3 Operation of SECS Protocol Product Manual
The table below defines the status of the BROOKS RFID reader.
Status Definition
ALARM
STATUS
Displays the presence or absence of alarms.
ALARMS An alarm condition exists.
BUSY A service is being performed that affects the status of
the hardware.
CIDRW Super-status of the CIDRW status model. Always active
when the CIDRW is powered on.
IDLE No service is being performed. All heads are idle.
INITIALIZING The CIDRW is carrying out initialization and a self-
diagnostic. Presence or absence of alarms is initially
determined in this status.
NO ALARMS No alarm condition exists.
OPERATING Normal operating status where reading and/or writing
operations can be performed.
OPERATING
STATUS
The CIDRW is fully capable of performing all services
that it supports.
RUNNING The CIDRW is operational and able to communicate.
MAINTENANCE Internal setup and maintenance activities.
To Next Page
Loading...
