Brooks LF80C - Page 180

Brooks Automation
II 278580 Revision A
LF80C ZeniD RFID Reader
Product Manual
Parameter 2 - Inter-character timeout T1 94
Parameter 2 - Read page 60
Parameter 20 - Sensor delay for presence sensor
96
Parameter 22 - Sensor-triggered action for
presence sensor 96
Parameter 23 - Triggered read frequency 96
Parameter 24 - r/w max repeat 96
Parameter 25 - Transponder type 97
Parameter 26 - Sensor activity 97
Parameter 27 - Watchport for presence sensor 97
Parameter 28 - Transmitter level (read mode) 97
Parameter 29 - Transponder load duration (read
mode) 98
Parameter 3 - Block protocol timeout T2 94
Parameter 3 - r/w repeat time 60
Parameter 30 - Read/write synchronization 98
Parameter 31 - Auto-adjust value (read mode) 98
Parameter 32 - Auto-adjust value (write mode) 98
Parameter 33 - Automatic environment
adjustment 99
Parameter 34 - Sensor type for presence sensor
99
Parameter 35 - Special features 99
Parameter 36, Lock membrane keyword 99
Parameter 37, MID area 100
Parameter 38, Test after software reset 100
Parameter 39, Transmitter level (write mode) 100
Parameter 4 - r/w max repeat 61
Parameter 4 - Reply timeout T3 94
Parameter 40, Transponder load duration (write
mode) 100
Parameter 41, Delay time between read cycles
101
Parameter 42, CarrierIDOffset 101
Parameter 43, CarrierIDLength 102
Parameter 44, FixedMID 102
Parameter 45, MIDFormat 102
Parameter 5 - Inter-block timeout T4 94
Parameter 5 - RS232 repeat time 61
Parameter 6 - Retry limit RTY 94
Parameter 6 - RS232 max repeat 61
Parameter 7 - TARGETID high byte 95
Parameter 7 - Watchport 61
Parameter 8 - TARGETID low byte 95
Parameter 9 - Heartbeat time 95
Parameter 99, Customer code 103
Parameter F - Reader address 62
PM Information 88
Power supply 21, 36
Prohibition symbols 9
PTN 88
R
R - Automatic read 49
RAC 88
Relative humidity 25
RIC 89
Rod antenna 22, 34
S
Safety Instructions 7
Safety symbols 8
SECS-I 63
SECS-I message examples 121
SECS-II 63, 74
SEMI E4 67
SEMI Equipment Communication Standard 63, 74
SHEAD 89
SOFTREV 89
SSACK 90
SSCMD 90
Standard housing 29
STATUS 91
Sub-D female plug 37
T
TARGETID 91
Temperature 25
Test mode 19
Tuning 18, 56
V
V - Query software version 54
W
W - Write data 48
Warning symbols 9
Warranty 5
X
X - Read data 47