Brooks Automation
54 278580 Revision A
7 Operation LF80C ZeniD RFID Reader
7.2 Operation of the ASC-I1 Protocol Product Manual
V - Query software
version
The command V is used to request the installed software version of the
RFID reader.
The 8 characters of the software version are described by 16 ASCII
characters. Each character is described in HEX format represented by 2
ASCII characters (see section
Message Examples).
Host → Reader
CMD Reader ID
V1 byte
Reader → Host
CMD Reader ID Software version
v 1 byte 16 bytes
To Next Page
Loading...
