Brother GT-3 Series - Page 246

6. Replacing Parts
16.
Remove the
one Screw (12) and remove the Tube Holder Outside (13).
(12)
(13)
<Remov
ing t
he two Clamps NK-18N (14) and the two Tube Holder Fixes (15)>
GT-3 Series
237
17. Remove the one Screw (16) and remove the Clamp NK-18N (14).
<Note> Do not drop the two Washers (17) at the bottom.
(14)
(15)
(14)
(15)
(A)
(B)
(C)
<Note>
Do not drop Two Washers (17).
(A)
(14)
(17)
(16)