Brother GT-3 Series - Page 247

6. Replacing Parts
18.
Remove the t
wo Screws (18) and remove the Tube Holder Fix (15).
(18)
(15)
19. Remove the
one Screw (19) and Clamp NK-18N (14).
<Note>
The recent productions have neither Screw (19) nor Clamp, NK-18N (14) mounted.
(19)
(14)
20.
Remove the t
wo Screws (20) and remove the Tube Holder Fix (15).
(15)
(20)
GT-3 Series
238