Brother HL-2060 - Page 110

VI-28
Error Message Meaning Action
42 CARD 1 FULL
CARD 2 FULL
43 CARD 1 W ERROR
CARD 2 W ERROR
45 MIO ERROR
46 OPT IO ERROR
47 CARD R ERROR
48 XX SIZE ERROR
IGNORE DATA
(BR- Script 2 mode only)
48 INCORRECT LT
49 INCORRECT DX
73 MAINTENANCE 1
Card overflow
Card write error
Error in communication with
the MIO card.
Connection error with optional
feeders and duplex unit.
Card read error
Paper of incorrect size is
loaded into XX. XX is T2/DX.
Data is ignored because of an
error in the Post Script
program.
The lower tray unit for HL-
1260 / 1260e / 1660 / 1660e is
installed.
The duplex unit for HL-1260 /
1260e / 1660 / 1660e is
installed.
Notice for replacing the
periodical replacement parts.
Delete unnecessary macros or
fonts, or use a new card.
Set the write protect switch of
the card to OFF if it has been
set to ON. Use a new card.
If the same error occurs,
consult your dealer or service
personal.
Install the MIO card correctly.
Check the interface cable
connection between the printer
and the fitted option.
Use a new card, If the same
error occurs, consult your
dealer or service personal.
Set the correct size of paper in
T2 or for duplex printing.
Press the RESET switch.
Install the lower tray unit LT-
2000.
Install the duplex unit DX-
2000.
Replace the following parts of
and reset the parts life
counter. (See Page V-1)
• Fixing unit
• Paper pick-up roller ASSY 3
• Paper pick-up roller ASSY 5
• Separation pad ASSY
• Separation pad ASSY W
• Transfer roller ASSY A