Brother HL-2060 - Chapter VII Troubleshooting; Hidden Functions; Holding down Specified Key(S) at Power on

VII-1
CHAPTER VII HIDDEN FUNCTIONS
1. HIDDEN FUNCTION LIST
HL-2060 has 3 entrance operation into the hidden function menu;
1. Power on and specified key(s)
2. Off-line and MODE + FF + CONT
3. Off-line and CONT + SEL
To regulate accesses from end users, the user’s manual mentions only “Off-line and
CONT + SEL”.
1.1 Holding down Specified Key(s) at Power on
The following basic printer setting and the factory test mode will be available with this
operation.
Key(s) Display Discription
Printer test mode
*for factory use*
Printer options (flash card,
font cart. MIO)test mode
*for factory use*
Check DRAM
Clear NV-RAM
(No display reads) Adjust the sensing point of
the toner empty.
Not read “toner empty”.
Read “toner empty” with
beep sound.
Read “toner empty” with no
beep sound.
Set a printer to work as a
standard machine.
Set a printer to work as a
demo machine.
(No display reads) Continuous test print
▲
LINE TEST
LINE TEST OPTION
DRAM CHECK START
NV-RAM CLEAR
ROM/RAM WAIT SET
exit MENU
TONER WARN = OFF
TONER WARN = ON
TONER WARN = QUIET
PRN MODE = NORMAL
PRN MODE = DEMO
CONTINUEMODE
TESTRESET
SEL
MODE