Brother HL-2060 - Incomplete Paper Feed

VI-21
5.2 Incomplete Paper Feed
F-1 Double feeding
Possible cause Step Check Result Remedy
Print paper 1 Is a recommended type of paper being used? No Instruct the user to use
recommended type of
paper.
Adjustment
lever
(spring pressure
switching lever)
2 Is the position of the adjustment lever of the
cassette corresponding to the paper sheet
size?
No Instruct the user to switch
adjustment lever position.
Paper front
guide
3 Is the paper front guide broken? Yes Replace the paper front
guide.
Separation pad No Replace the separation
pad.
F-2 Wrinkles
Possible cause Step Check Result Remedy
Print paper 1 Is a recommended type of paper being used? No Instruct the user to use
recommended type of
paper.
2 Is the wrinkle problem solved if fresh paper is
used?
Yes Instruct the user in correct
print paper storage
procedure to be free from
moisture.
Paper pick-up
block
3 Is the paper already wrinkled or being fed
askew?
Yes Check the motion of the
paper-pick up block.
Fixing unit
entrance guide
4 Is the entrance guide dirty? Yes Clean the entrance guide.
Fixing unit No Replace the fixing unit.