Brother HL-2060 - Font Cover Assy; Upper Cover Assy, Rear Cover Assy

IV-5
1.5 Font Cover ASSY
(1) Remove the font cover ASSY by loosening the screw on the top and releasing the
hooks on the bottom.
Figure 4.5
1.6 Upper Cover ASSY, Rear Cover ASSY
1.6.1 Upper cover ASSY, Rear cover ASSY
(1) Loosen the top left screw and 2 screws at the top of the Rear cover ASSY.
(2) Release the hook at the right side of the Upper cover ASSY and lift it upwards to
remove.
Note: Pay attention to the Paper sensor actuator when removeing the Upper cover
ASSY.
The hook is released automatically by removing the Upper cover ASSY in the
direction of the arrow.
Figure 4.6
Screw
Hook
Font cover ASSY
Hook
Upper cover ASSY
Hook
Screw
Swing tray