Brother HL-2060 - Changeover Guide, Jam Remove Cover; Side Cover R

IV-7
1.6.2 Changeover guide, Jam remove cover
(1) Open the jam remove cover by hooking your finger on 2 dents ( ).
(2) Remove the jam remove cover with its center part opened by bending the arm of
the boss both on sides ( ) toward the front ( ).
(3) Remove the changeover guide from the boss by bending the right hook (viewed
from the rear) of the Rear cover ASSY ( ), then remove the changeover guide (
).
Figure 4.9
1.7 Side Cover R
(1) Remove the screw and remove the Front cover.
Figure 4.10
C
D
Jam remove cover
Hole
Boss
Rear cover ASSY
Changeover
guide
Dents
A
B
C
E
D
E
B
A
Screw
Front cover
Hook
Hook