Brother HL-2060 - Paper Feed Chassis Unit

IV-13
(5) Release the hook by bending the arm of the Cartridge stopper ASSY (
A
), slide the
Cartridge stopper ASSY to the left (
B
) and the remove the Cartridge stopper ASSY
(
C
).
Figure 4.22
1.12 Paper Feed Chassis Unit
(1) Pull out the unit by loosening the 8 screws (4 screws for front and 4 screws for
bottom).
Figure 4.23
Note: When installing the Paper feed chassis unit, screw the left chassis of this Paper
feed chassis unit, set the paper tray, displace the right chassis of this unit up to
the paper tray and screw them.
Screws
Screws
Paper feed chassis unit
A
Laser unit mount plate
Cartridge stopper ASSY
B
C