Brother HL-2060 - Page 61

IV-14
(2) Remove the Paper hold front and the Paper hold rear by pushing the top of the
Paper hold front and sliding it down.
Figure 4.24
(3) Release the left cartridge hold roller and remove the cartridge guide L (by
loosening the screw and releasing the hook) then pull out feed flat cable 20P.
Figure 4.25
(4) Remove the Paper feed chassis unit.
Figure 4.26
Paper feed chassis unit
Screw
Hook (the rear side)
Cartridge hold roller
Cartridge guide L
Feed flat cable 20P
Paper hold front
Screws
Screws
Paper hold rear