Brother HL-2060 - Toner Cartridge (EP-ED HC Cartridge

IV-31
(2) Remove the PS switch wire.
(3) Loosen the 2 screws with the spring washer on the right side.
(4) Loosen the 4 screws with the spring washer on the Low-voltage power supply
PCB.
(5) Disconnect the LV harness 8P.
Figure 4.66
1.34 Toner Cartridge (EP-ED HC Cartridge)
(1) Open the Toner cartridge lid and pull out the toner cartridge.
Figure 4.67
EP-ED HC
cartridge
Screw
Screw
Screw
PS switch wire
Screw
Screw
Low-voltage power
suppl
y
PCB ASSY
LV harness 8P