Brother HL-5270DN

Configuring your wireless network printer (HL-5280DW only)
3 - 8
3
14 Press Set.
Press the + button or the - button to select AUTHENTICATION.
15 Press Set.
Press the + button or the - button to select the Authentication method.
Press Set.
If you select OPEN SYSTEM, WPA-PSK or LEAP, go to Step 16.
If you select SHARED KEY, go to Step 18.
16 Press the + button or the - button to select ENCRYPTION.
17 Press Set.
Press the + button or the - button to select the Encryption type.
If you have selected OPEN SYSTEM in Step 15, select NONE or WEP.
If you have selected WPA-PSK in Step 15, select TKIP or AES.
If you have selected LEAP in Step 15, select CKIP.
Press Set.
If you select NONE, go to Step 32.
If you select WEP, go to Step 18.
If you select TKIP or AES, go to Step 26.
If you select CKIP, go to 28.
AUTHENTICATION
OPEN SYSTEM SHARED KEY WPA-PSK
LEAP
ENCRYPTION
NONE WEP TKIP
AES CKIP