Brother MFC-3360C - Scan to File

Network Scanning (For models with built-in network support)
142
11
Scan to File 11
When you choose Scan to File, you can scan a black and white or colour document and send it directly to the
Macintosh
®
you designate on your network. The file will be saved in the folder and file format that you have
configured in ControlCenter2 on the designated Macintosh
®
. You can change the Scan configuration. (See
File on page 129.)
a Load your document.
b Press the (Scan) key.
c Press a or b to choose Scan to File.
Press OK.
d Press a or b to choose the destination Macintosh
®
you want to send to.
Press OK.
If the LCD prompts you to enter a Pin number, enter the 4-digit Pin number for the destination
Macintosh
®
on the control panel.
Press OK.
e Press Mono Start or Colour Start.
The machine starts the scanning process.