Brother MFC-3360C User Manual

Network Scanning (For models with built-in network support)
73
4
Scan to File 4
When you choose Scan to File, you can scan a black and white or colour document and send it directly to a
PC you designate on your network. The file will be saved in the folder and file format that you have configured
in ControlCenter3. You can change the Scan configuration. (See File on page 53.)
a Load your document.
b Press the (Scan) key.
c Press a or b to choose Scan to File.
Press OK.
d Press a or b to choose the destination PC you want to send to.
Press OK.
If the LCD prompts you to enter a PIN number, enter the 4-digit PIN number for the destination PC on
the control panel.
Press OK.
e Press Mono Start or Colour Start.
The machine starts the scanning process.
Note
If you want the scanned data in colour, choose colour in the scan type in the Device Button tab of the
ControlCenter3 configuration. If you want the scanned data in black and white, choose black and white in
the scan type in the Device Button tab of the ControlCenter3 configuration. (See SCAN on page 49.)

Brother MFC-3360C Specifications

General

Brand	Brother
Model	MFC-3360C
Category	All in One Printer
Language	English