ControlCenter2
140
COPY / PC-FAX 10
The Copy1-Copy4 buttons can be customized to allow you to use advanced copy and fax functions such as
N-in-1 printing.
To use the Copy buttons, configure the printer driver by clicking the button while holding down the Ctrl key.
Enter a name in Name for Copy (up to 30 characters) and choose Copy Ratio.
Choose the Resolution, Scan Type, Document Size, Show Scanner Interface, Brightness and Contrast
settings to be used.
Before finishing the Copy button configuration, set the Printer Name. Then choose your print settings from
the Presets pop-up menu, then click OK to close the dialog box. By clicking the configured copy button, the
print dialog box opens.
To copy, choose Copies & Pages from the pop-up menu.
To fax, choose Send Fax from the pop-up menu. (Sending a fax (For MFC models only) on page 107.)
To Next Page
Loading...
Need help?
General
