Brother MFC-820CW User Manual

Network Scanning (For models with built-in network support)
147
Scan to Image 11
When you choose Scan to Image, your document will be scanned and sent directly to the Macintosh
®
you
designated on your network. ControlCenter2 will activate the default graphics application on the designated
Macintosh
®
. You can change the Scan configuration. (See Image (example: Apple
®
PreView) on page 130.)
a Load your document.
b Press Scan.
c Press a or b to choose Scan to Image.
Press Menu/Set, Set or OK.
d Press a or b to choose the destination Macintosh
®
you want to send to.
Press Menu/Set, Set or OK.
If the LCD prompts you to enter a Pin number, enter the 4-digit Pin number for the destination
Macintosh
®
on the control panel.
Press Menu/Set, Set or OK.
e Press Black Start or Color Start.
The machine starts the scanning process.
Scan to OCR 11
When you choose Scan to OCR, your document will be scanned and sent directly to the Macintosh
®
you
designated on your network. ControlCenter2 will activate the OCR software installed on your Macintosh
®
(Presto!
®
PageManager
®
) and convert your document into text for viewing and editing from a word
processing application on the designated Macintosh
®
. You can change the Scan configuration. (See OCR
(Word Processing program) on page 132.)
a Load your document.
b Press Scan.
c Press a or b to choose Scan to OCR.
Press Menu/Set, Set or OK.
d Press a or b to choose the destination Macintosh
®
you want to send to.
Press Menu/Set, Set or OK.
If the LCD prompts you to enter a Pin number, enter the 4-digit Pin number for the destination
Macintosh
®
on the control panel.
Press Menu/Set, Set or OK.
e Press Black Start or Color Start.
The machine starts the scanning process.
Note
Presto!
®
PageManager
®
must be installed on your Macintosh
®
.

Brother MFC-820CW Specifications

General

Brand	Brother
Model	MFC-820CW
Category	All in One Printer
Language	English