Network Scanning (For models with built-in network support)
146
Using the Scan key 11
Note
If you use the Scan key on USB, see Using the Scan key (For USB cable users) on page 117.
Scan to E-mail 11
When you choose Scan to E-mail (Macintosh
®
), your document will be scanned and sent directly to the
Macintosh
®
you designated on your network. ControlCenter2 will activate the default E-mail application on
the designated Macintosh
®
for addressing to the recipient. You can scan a black and white or color document
and it will be sent with the E-mail from the Macintosh
®
as an attachment.
You can change the scan configuration. (See E-mail on page 133.)
a Load your document.
b Press Scan.
c Press a or b to choose Scan to E-mail.
Press Menu/Set, Set or OK.
d Press a or b to choose the destination Macintosh
®
you want to use for E-mailing your document.
Press Menu/Set, Set or OK.
If the LCD prompts you to enter a Pin number, enter the 4-digit Pin number for the destination
Macintosh
®
on the control panel.
Press Menu/Set, Set or OK.
e Press Black Start or Color Start.
The machine starts the scanning process.
To Next Page
Loading...
Need help?
General
