149
12
Remote Setup
(For Mac OS
®
X 10.2.4 or greater)
(Not available for DCP models)
12
The Remote Setup application allows you to configure many machine settings from a Macintosh
®
application.
When you access this application, the settings on your machine will be downloaded automatically to your
Macintosh
®
and displayed on your Macintosh
®
screen. If you change the settings, you can upload them
directly to the machine.
Note
The ‘Remote Setup’ application icon is in Macintosh HD/Library/Printers/Brother/Utilities.
OK
Allows you to start uploading data to the machine and exit the Remote Setup application. If an error
message is displayed, enter the correct data again and then click OK.
Cancel
Allows you to exit the Remote Setup application without uploading data to the machine.
Apply
Allows you to upload data to the machine without exiting the Remote Setup application.
Print
Allows you to print the chosen items on the machine. You cannot print the data until it is uploaded to the
machine. Click Apply to upload the new data to the machine and then click Print.
Export
Allows you to save the current configuration setting to a file.
Import
Allows you to read the setting from a file.
Remote Setup & PhotoCapture Center™ 12
To Next Page
Loading...
Need help?
General
