EasyManuals Logo

Brother MFC-9330CDW Network User's Guide

Brother MFC-9330CDW
150 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #145 background imageLoading...
Page #145 background image
Appendix B
139
B
Using RARP to configure the IP address B
Before you configure the IP address using RARP, you must set the machine’s Boot Method to RARP. To
change the Boot Method, use the machine’s control panel Network menu, BRAdmin applications, Remote
Setup (For MFC models), or Web Based Management (web browser).
The Brother print server’s IP address can be configured using the Reverse ARP (RARP) facility on your host
computer. This is done by editing the /etc/ethers file (if this file does not exist, you can create it) with an
entry similar to the following:
00:80:77:31:01:07 BRN008077310107 (or BRW008077310107 for a wireless network)
Where the first entry is the MAC Address (Ethernet Address) of the print server and the second entry is the
name of the print server (the name must be the same as the one you put in the /etc/hosts file).
If the RARP daemon is not already running, start it (depending on the system the command can be rarpd,
rarpd -a, in.rarpd -a, or another command; type man rarpd or refer to your system documentation
for additional information). To verify that the RARP daemon is running on a Berkeley UNIX based system,
type the following command:
ps -ax | grep -v grep | grep rarpd
For AT&T UNIX-based systems, type:
ps -ef | grep -v grep | grep rarpd
The Brother print server will get the IP address from the RARP daemon when the machine is powered on.

Table of Contents

Other manuals for Brother MFC-9330CDW

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Brother MFC-9330CDW and is the answer not in the manual?

Brother MFC-9330CDW Specifications

Print Specifications IconPrint Specifications
print speed blackup to 23 ppm
print speed colorup to 23 ppm
print resolutionup to 600 x 2400 dpi
Copy Specifications IconCopy Specifications
copy speed blackup to 23 cpm
copy speed colorup to 23 cpm
copy resolution600 x 600 dpi
Scan Specifications IconScan Specifications
scan resolution optical1200 x 2400 dpi
scan resolution interpolated19200 x 19200 dpi
document glass size8.5” x 11.7”
Fax Specifications IconFax Specifications
fax modem speed33.6k bps
fax page memoryup to 500 pages
speed dial locations200
Paper Handling IconPaper Handling
auto document feeder capacityup to 35 pages
paper size maximumup to 8.5” x 14” (legal)
standard paper capacity250 sheets
Power and Energy IconPower and Energy
deep sleep mode power consumption<2W
automatic duplex printingYes
energy star qualifiedYes

Related product manuals