Security features
85
Configure certificate using Web Based Management 7
This feature can be configured using Web Based Management only. Follow these steps to access the
configure certificate page using Web Based Management.
a Start your web browser.
b Type “vmachine’s IP address/” into your browser’s address bar (where “machine’s IP address” is the
IP address of the machine or the print server name).
For example: v192.168.1.2/
c No password is required by default. If you have previously set a password, enter it and press .
d Click Network.
e Click Security.
f Click Certificate.
g You can configure the certificate settings from the screen below.
• The functions that are grayed and unlinked indicate they are not available.
• For more information on configuration, see the Help text in the Web Based Management.