Brother MFC-9330CDW Network User's Guide

Control panel setup
48
4
Printing the Network Configuration Report 4
NOTE
Node name: The Node name appears on the Network Configuration Report. The default node name is
“BRNxxxxxxxxxxxx” for a wired network or “BRWxxxxxxxxxxxx” for a wireless network. (“xxxxxxxxxxxx” is
your machine’s MAC Address / Ethernet Address.)
The Network Configuration Report prints a report listing all the current network configuration including the
network print server settings.
a Press .
b Press All Settings.
c Swipe up or down, or press a or b to display Print Reports.
Press Print Reports.
d Press Network Configuration.
e Press OK.
NOTE
If the IP Address on the Network Configuration Report shows 0.0.0.0, wait for one minute and try again.
Printing the WLAN report
(For DCP-9020CDW, MFC-9130CW, MFC-9330CDW and
MFC-9340CDW)
4
The WLAN Report prints your machine’s wireless status report. If the wireless connection failed, check the
error code on the printed report. See Quick Setup Guide: Troubleshooting.
a Press .
b Press All Settings.
c Swipe up or down, or press a or b to display Print Reports.
Press Print Reports.
d Swipe up or down, or press a or b to display WLAN Report.
Press WLAN Report.
e Press OK.

Brother MFC-9330CDW Specifications

Print Specifications

print speed black	up to 23 ppm
print speed color	up to 23 ppm
print resolution	up to 600 x 2400 dpi

Copy Specifications

copy speed black	up to 23 cpm
copy speed color	up to 23 cpm
copy resolution	600 x 600 dpi

Scan Specifications

scan resolution optical	1200 x 2400 dpi
scan resolution interpolated	19200 x 19200 dpi
document glass size	8.5” x 11.7”

Fax Specifications

fax modem speed	33.6k bps
fax page memory	up to 500 pages
speed dial locations	200

Paper Handling

auto document feeder capacity	up to 35 pages
paper size maximum	up to 8.5” x 14” (legal)
standard paper capacity	250 sheets

Power and Energy

deep sleep mode power consumption	<2W
automatic duplex printing	Yes
energy star qualified	Yes